ALTANA Micro-Wave-Scan Manual - Manual (Page 9)

8
Safety instructions
WARNING severe material damage
• The measurement unit consists of sensitive
optical and electronic precision parts. Prevent it
from being dropped, bumped or shaken!
• Avoid exposure to continuous humidity and
con densation. Avoid splashing with water,
chemicals or other liquids.
• Please use only accessories that are available
for the unit.
• Only devices that meet the requirements for
low voltage safety may be connected to the
interface.
Great Britain:
• When working with the batteries /rechargeable
batteries make certain there is no short circuit
on the contacts. Metallic objects must not come
in contact with the bare contacts.
• The measurement unit is a class II laser
product.
The labels shown left are on the housing and
base of the measurement unit.
Caution:
• Never look into the measurement aperture
when the device is turned on. The laser beam
can penetrate your eye and cause injuries.
(EN 60825)
USA:
Laser Light
Do not stare into beam
Class 2 Laser Product
max < 1 mW 630 – 690 nm
According to IEC 825