ALTANA Micro-Wave-Scan Manual - Manual (Page 44)

43
11.2 Configuration Change
This function allows to modify the configuration of
an existing memory. A menu appears with a list of
the existing memories and organizers.
Select the desired memory.
A menu then appears listing the configuration of
the selected memory. To change the settings, refer
to chapter 9 and 10.
To exit the menu, activate the arrow at the top of
the menu.
Note: Changes to the settings of Organizer files
are not permitted. If an Organizer is selected, a
warning message will appear.
The configuration can only be changed if no
readings are saved in the selected memory. Before
changing, first backup the readings and then delete
the data.
11.3 Configuration Delete
The delete function opens the selection menu for
the memories which are present.
Select the memory to be deleted.
A display appears to confirm the deletion process.
The instrument returns to the Memory menu.
Note: Deletion of a memory that contains
measurement data is not permitted.
If necessary, use the Data Delete function
described at the end of this chapter.
Deletion of an Organizer is only permitted if its
corresponding lock-function is deactivated in the
smart-chart software (organizer protected).
Memory