ALTANA Micro-Wave-Scan Manual - Manual (Page 45)

44
Memory
The measurement values appear in the display.
Press the operate button to display the next
checkzone.
The numbers at the upper left of the display
represent the displayed/existing checkzone
numbers.
The checkzone name is displayed just below.
If more measurement data is present than can be
displayed, an arrow will appear on the right edge of
the display. Scroll down to view the remaining data.
Pressing the scroll will exit this display. The
instrument returns to the Memory menu.
11.4 Data View
You can use this function to display all
measurement series stored in the instrument.
First, the selection menu for existing memories will
be shown.
Select the desired memory to recall its contents.
If the selected memory is identified by additional
parameters, further menus will appear:
Select Parameter 2.
Select Parameter 3.
As appropriate, select Comment and ID
accordingly.
Finally, select the measurement series itself under
date and time.
Data View Series
20.09.11 08:21
20.09.11 10:52
21.09.11 15:20
HoodCenter n = 3/3
x R
Wa 10.8 11.5 1.8
Wb 17.4 17.8 2.1
Wc 8.7 9.2 0.9
Wd 12.3 12.9 1.4
LW 7.8 7.3 1.2
1/8