ALTANA Micro-Wave-Scan Manual - Manual (Page 29)

28
Measure
Interrupt Checkzone
This function allows you to exit a checkzone/
sample before reaching the preset number of
measurements or to skip a checkzone. Then you
can continue the measurement series with the next
checkzone.
If Interrupt is not activated in the Configuration
menu (Chapt. 9) or the Configuration of the
selected Organizer, a message will be displayed.
Parameter Info
Gives you an information about the selected
parameters of the sample.
End Test Series
Ends the entire measurement series. A
confirmation display appears. The instrument
returns to the Measure menu.
If Interrupt is not activated in the Configuration, a
message will be displayed in the case that the test
series is not finished yet.
Note:
Only complete series can be saved, i.e. you can
exit series only by deletion.