ALTANA Micro-Wave-Scan Manual - Manual (Page 19)

18
The basic system consists of the measurement
device and the docking station.
The docking station is used to exchange data and
to charge the rechargeable battery pack.
When the unit is not in use, place it in the docking
station. In this way the rechargeable battery pack
will be charged and the instrument will always be
ready for measurements.
The operate button and scroll wheel are used to
control the system. Pressing “operate“ turns the
unit on and causes a menu to be displayed. All
settings within the menus are made by turning the
wheel and pressing “operate”.
Pressing the operate button performs
measurements or runs selected functions. System
operation is supported by an autodiagnosis test,
comments and error messages. Measurement
values and comments appear in the display.
Controls