ALTANA Micro-Wave-Scan Manual - Manual (Page 48)

47
12.5 Date / Time
The unit contains an integrated clock. This makes
the date and time of the measurement available
for data transfer to a PC. The date and time are
not lost even when the battery is changed. If
necessary, adjust the data by using the scroll
wheel.
12.6 Display Time
To save energy, the unit automatically turns off
after a certain amount of time. You can determine
what this time is by specifying a switch off time
between 15 and 99 seconds.
12.4 Info
This menu displays the following information about
the device:
•
Catalog no
• Serial no
• Firmware version
• Free memory capacity
• Battery capacity
• Date of last certification
Setup
Catalog no 4824
Serial no 1001728
Version 4.47
Free mem. 100%
Battery 50%
Certified 01.09.2011
Info
Date/Time:
10.22.2011 02:39
Confirm [operate]
Setup
PM