Note, Cautions, Notes – Sharp VIEWCAM VL-WD650U User Manual

Page 33: Using the viewfinder

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

You can record the subject using the electronic

LCD viewfinder. You can also watch playback

through the viewfinder.

Using the Viewfinder

Viewfinder

Power switch

1

Lift up the viewfinder.

Note:

• You can raise the viewfinder to aim the

camcorder better depending on your

position.

Hold down the Lock button

and set the Power switch to

CAMERA or VCR.

^

• A picture is displayed in the

viewfinder.

f

Lower the viewfinder.

Cautions:

• Do not use excessive force when moving the

viewfinder.

• Do not pick up the camcorder by the viewfinder.

Notes:

• The viewfinder automatically turns off when the

LCD monitor is opened. When the vertical
rotation of the monitor is between 135° and 180°,
however, the viewfinder is on and the subject is

displayed both in the viewfinder and on the

monitor (see page 42).

• Be sure to close the viewfinder after use.

Adjusting the Diopter

Adjust the diopter according to your eyesight
when the picture in the viewfinder is not clear.

1

Lift up the viewfinder.

2

Hold down the Lock button and set the

Power switch to CAMERA.

3

While looking through the viewfinder,

turn the Diopter adjustment until the

indicators in the viewfinder are clearly

visible.

Diopter

Closing the viewfinder

■D

CD

■g

I'r'

Lock button

18

Advertising
This manual is related to the following products: