Inserting and removing a smartmedia card, Removing a smartmedia card, Features – Sharp VIEWCAM VL-WD650U User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting and Removing a
Inserting a SmartMedia Card
Make sure that the Power switch is set
Open the LCD monitor.
Close the card slot cover.
Card slot cover ■
Open the card slot cover in the direction
of the arrow.
Insert a SmartMedia card into the slot
as shown below, and push it in as far as
it will go.
Removing a SmartMedia Card
Perform steps 1 and 2 above, and then pull the
SmartMedia card straight out as shown below.
• The supplied SmartMedia card is preformatted
for immediate use.
• Be sure not to apply pressure to the card slot
cover, as the camcorder may not record the still