Sharp VIEWCAM VL-WD650U User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a Mini DV Cassette Inserting a SmartMedia Card
1
Attach the power source to the
camcorder, then slide the cassette
compartment door release and open the
cassette compartment door.
2
Insert the cassette fully with the window
facing outwards, and with the erasure
protect tab facing upwards.
Press the i
3
«a!gEii mark gently until the
cassette holder clicks into place. Close
the compartment door by pressing the
center until it clicks into place.
1
Make sure that the power switch is set to
OFF.
2
Open the LCD monitor.
Card slot cover
3
Open the card slot cover in the direction
of arrow.
4
Insert a SmartMedia card into the slot
as shown below, and push it in as far as
it will go.
Chipped corner
Contact area
5
Close the card slot cover.
VI