Easy camera recording on tape, Tape playback, Zooming – Sharp VIEWCAM VL-WD650U User Manual
Page 8: Easy camera recording on tape 1, Tape playback 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Quick Operation Guide
Easy Camera Recording on
Tape
1
Make sure that a cassette is inserted.
2
Remove the lens cap, and lift up the
viewfinder.
3
Set the Media Selection
switch to TAPE.
4
Hold down the Lock button
and set the Power switch to
CAMERA.
5
Press the REC START/STOP button to
begin recording.
@@J
REC
Tape Playback
1
Press the LCD monitor OPEN release
button (®), and open the LCD monitor
to a 90° angle to the camcorder body
(®).
allows easy viewing on the on-screen
picture.
3
Set the Media Selection
^
switch to TAPE.
If]
i
f
Hold down the Lock button
and set the Power switch to
VCR.
««r«
Lock button
Zooming
Push the Power Zoom control to T (®)
(telephoto) or W (®) (wide angle) side.
Press (or ►►) on the Operation
button to rewind (or fast forward) the
tape to the desired point.
AUDI01+2
6
Press ► / II to begin playback.
AUDI01+2
O ■
To stop playback
Press ■ .
VII