Note, To pause recording on tape, To turn off the inset image – Sharp VIEWCAM VL-WD650U User Manual
Page 56: To cancei stiii recording effects
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using P-IN-P mode
Perform the steps in “Selecting a still
recording effect” to select “P-IN-P” (see
In Recording Standby mode, press the
• An inset image of the subject is
To change the position of the inset
image, press or ►► on the Opera
tion button. The inset image moves as
Adjust the Power Zoom control to frame
the inset subject.
Press ► / II to freeze the inset
• Pressing ►/!!, or ►► while
the inset image is frozen oanoels
the still image.
Press the REC START/
• The still image of the
subject will be recorded.
• In CARD-CAMERA mode,
press the STILL button,
instead of the REC START/
To pause recording on tape
Press the REC START/STOP button.
To turn off the inset image
Press the MENU/DISPLAY button.
To cancei stiii recording effects
Select “OFF” in step 5 of “Selecting a still
• P-IN-P mode oannot be used together with the
—Mosaio pioture effeot
—Brighter mode (TIXIY) of the gain-up function