Sharp VIEWCAM VL-WD650U - Manual (Page 6)

Quick Operation Guide
Please consult this operation manual
further for details on these and other
functions of your camcorder.
Charging the Battery Pack
1
Connect the supplied power cord to the
AC power socket on the AC adapter/
battery charger, and insert the AC plug
into a power outlet.
2
Align the
T
mark on the battery pack
with the
A
mark on the charger (®) and
guide the battery into the groove.
Pressing the battery (®), slide it in the
direction of the arrow (@) until it locks
into place.
Attaching the Battery Pack
1
Make sure that the Power switch is set
to OFF.
2
Lift up the viewfinder.
3
Align the - mark on the side of the
battery pack with the ◄ mark on the
camcorder (®), and slide the battery
pack down completely until it locks into
place (®).
Turning the Power on
Media Selection switch
Power switch
To use the camera recording
functions,
hold down the Lock |
button and set the Power switch to ^
CAMERA.
Lock button
To use the playback and editing
functions,
hold down the Lock
button and set the Power switch to
VCR.
i
Lock button
Switching the Media
To use a mini DV cassette for
recording and playing back
images, set the Media Selection '
switch to TAPE.
To use a SmartMedia card for
recording and playing back still
images, set the Media Selection r
switch to CARD.
Turning the Power off
Set the Power switch to OFF
without pressing the Lock button.
it
t