Connecting a digital audio system, You will need, Connecting an analog audio system – Toshiba 32HLX95 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2: Connecting your TV
Connecting a digital audio system
The TV DIGITAL AUDIO OUT terminal outputs a Dolby
Digital
or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby Digital
decoder or other external audio system with optical audio input.
You will need;
► one optical audio cable (Prepare the cable which matched
shape of the optical jack.)
To control the audio;
Turn on the TV and the digital audio device.
Press MENU on the TVs remote control and open the Audio
menu.
Highlight Audio Setup and press ENTER.
In the Optical Output
Format field, select either
Dolby Digital/Surround or
PCM, depending on your
device (see “Selecting the
optical audio output format”
on page 76).
Audio Setup
f?-: £) '/Ì7
Audio Settings
Advanced Audio Settings
mrs
Language
Speakers
Optical Output Format
DVD Audio
Reset
English
Dolby Digital/Surround
Stereo
CAUTION:
Some audio systems may not be compatible with Dolby Digital bitstream
signals. Older audio systems that are not compatible with standard optica!
out signals may not work properly creating a high noise level that may
damage your hearing, speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY.
Note:
• The DIGITAL AUDIO OUT terminal may not output some digital audio
sources because of copy restrictions.
• The DIGITAL AUDIO OUT terminal outputs the digital audio sources
only when the digital broadcasts [ATSC or DigitalCable] are received or
the DVD section plays a disc.
Connecting an analog audio system
This connection allows you to use external speakers with an external audio amplifier to adjust the sound level.
You will need;
► one pair of standard audio cables
To control the audio;
Turn on the TV and the stereo amplifier.
Turn off the TVs built-in speakers (see “Turning off the built-in
speakers” on page 76).
Note:
To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set to a reasonable
listening level.
22
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.