Toshiba 32HLX95 - Manual (Page 82)

ChàptBr 9: Usliìg the Locks menu
Blocking channels
With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you clear the setting first.
To block channels:
( 5
Enable Rating Blocking s
» Edit Rating Limits
ii Input Lock
I Front Panel Lock
I Game Timer
s New PIN Code
Off
Off
Off
Press MENU and highlight the Locks menu icon.
To exit the Locks menu,
press MENU.
Press T to display the
PIN code entering
screen.
Enter your four-digit PIN
code and press ENTER
(see page 80 for details).
Press T to highlight Channels Block and then press ENTER.
Using the AT^ ► buttons, select the input for which you
want to change the rating limits (ANTI, ANT2, or Cable
Box, if connected) and press ENTER.
A list of the channels available for that input will be displayed
along with the call letters for each channel, if available.
Press M to highlight the
|¥) Navigate I#! Select tiiiiiiil Back
Channels Block
channel you want to * □
1 ® ANT1
block, then press ENTER, □ 2 O ANT2
which puts an “X” in the □
3 0 Cable Box
box next to that channel.
□
□
4
i
5
!
—
7. Repeat step 6 for other □
6
channels you want to
block.
□
□
7
8
9
Allow All
Block All
Cancel
8. Highlight Done and w U 10 ■
press ENTER.
To unblock individual channels:
In step 6 above, press AT to highlight the channel you want to
unblock, and then press ENTER to remove the “X” from the
box, and highlight Done, and then press ENTER.
To block all channels at once:
Highlight Block All in step 6 above, and then highlight Done,
and press ENTER.
To unblock all locked channels at once:
Highlight Allow All in step 6 above, and then highlight Done,
and press ENTER.
Channels Block
1 ii - ®ANT1
□ 2 i: -- OANT2
□ 3 ? - O Cable Box
□ 4 il -
□ 5 :i -
□ 6 i --
□ 7 ? -
□ 8 - Block All
□ Q :: - Cancel
^ □ 10 Done
Note: Channel blocking may not take effect if you have a cable
box connected and use the cable box controls to change channels.
Unlocking programs temporarily
If you try to watch a TV program that exceeds the rating limits
you set, the TV enters program lock mode. You can either
unlock the program temporarily or select a non-locked program
to watch.
This program exceeds the rating limit you set.
Push 'mute' to enter PIN.
To temporarily unlock the program:
1. Press MUTE.
2. Enter your four-digit PIN code and press ENTER. If the
correct code is entered,
the program lock mode
is released and the
normal picture appears.
All locking is disabled
until the TV is turned
off, and will be enabled
when the TV is turned on ;
Enter PIN code to temporaity un­
block.
S9BB
Cancel
L again.
Locking video inputs
You can use the Input Lock feature to lock the video input
sources (VIDEO 1, VIDEO 2, ColorStream HD 1,
ColorStream HD 2, HDMI, PC) and channels 3 and 4. You
will not be able to view the input sources or channels until you
turn off the input lock.
To lock the video inputs:
1. Press MENU and highlight the Locks menu icon.
2. Press T to display the PIN code entering screen.
3. Enter your four-digit PIN code and press ENTER.
4. Press T to highlight Input Lock and press ENTER.
5. Press AT to select the level of video input locking you
prefer, as described below:
Video: Locks, Built-in
iii Enable Rating Blocking »
is Edit Rating Limits
ss Channels Block
ig Front Panel Lock
I Game Timer
New PIN Code
Off
Off
t#l Navigate Select fiiiriill Back ISIfFi Exit
DVD, VIDEO 1,
VIDEO 2, ColorStream
HD 1, ColorStream HD
2, HDMI, and PC.
Video +: Locks, Built-in
DVD, VIDEO 1,
VIDEO 2, ColorStream
HD 1, ColorStream HD
2, HDMI, PC and channels 3 and 4. Select Video + if you
use the antenna terminal to play a video tape.
Off: Unlocks all video input sources.
6. Press ENTER.
Note: When the CableCARD™ is inserted, the Video + will
behave the same as the Video lock.
82 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.