Toshiba 32HLX95 - Manual (Page 75)

Chapter 8: Using the TVs features
Adjusting the audio (continued)
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
fs Advanced Audio Settings ;s
si Audio Setup
t^} Navigate |#| Select QB Back Exit
3. Press TA to highlight the item you want to adjust (Bass,
Treble, or Balance).
Audio Settings
Treble
Balance
StableSound
4. Press to adjust the level.
• A makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• ► makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
5. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Using the StableSound® feature
The StableSound® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound® feature;
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
B Advanced Audio Settings ®
b ; Audio Setup
Select Rliiin Back 033 Exit
3. Press T to highlight StableSound, and then press ^ ► to
select On.
Audio Settings
Bass
Treble
Balance
50
50
0
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Note: The Reset function returns your audio adjustments to the
following factory settings:
Bass.............. center (50)
Treble............ center (50)
Balance......... center (0)
StableSound... Off
To turn off the StableSound feature:
Select Off in step 3 above.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
75