Using the channelbrowser, Elements of the channel browser banner, To tune to channels in browse mode – Toshiba 32HLX95 User Manual
Page 62: To tune to channels in select mode, To toggle between “browse” and “select” modes, Tuning channels
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 8: Using the TV’s features
Tuning channels
Using the ChannelBrowser™
The Channel Browser feature allows you to browse and view channels by storing your recently viewed channels in channel history.
You can surf Back to channels you viewed prior to your current channel, and surf Forward from previous channels up to your current
channel. With this feature, you will be able to do the following:
• Surf via “Browse” mode or “Select” mode
• Keep a history of the last 32 channels viewed
• Set a single channel as the “HOME” channel for up to three inputs
Elements of the channel browser banner:
Press ^ ► until the Channel Browser appears.
To tune to channels in Browse Mode:
In Browse mode, channels are tuned to immediately. The
channel box in the channel browser window will be highlighted
yellow when selected.
1. Press @ ^
► when watching 1 V to open the Channel
Browser banner and to tune back to a previous channel or
next to the next saved channel in the history.
2. Press EXIT to close the channel browser.
■9
1
«2-1
Hold HOME key
3 sec to program
ANT 1
CABLE Ch.102-1
1080Ì
QCh.3
/Vote: The channel browser closes automatically If you do not
make a selection with in 60 seconds,
To tune to channels in Select Mode:
In Select mode, channels are highlighted in the channel browser
banner and must be tuned to manually as described below. The
channel box in the channel browser will have a yellow border
when selected.
1. Press ® ^ @ ► when watching TV to open the Channel
Browser banner and to navigate back to the previous
channel or next to the next saved channel in the history.
2. Press ENTER to tune to the channel you want.
3. Press EXIT to dose the channel browser.
$ Select Mode
CABLE Ch.102-1
Hold HOME key
3 sec to program
To toggle between “Browse” and “Select” modes:
While in the Channel Browser screen, press
AT
to go between
the “Browse” and “Select” modes. The mode section will flash
green.
Note:
The Channel Browser opens in “Browse" mode by
default
62
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.