Toshiba 32HLX95 - Manual (Page 44)

Chapter 6: Setting up your TV
Viewing the CableCARD™ menu
A CableCARD™ enables you to view encrypted digital channels.
See page 15 for connection and subscription information.
After the CableCARD™ is inserted, a CableCARD™ option
appears in the Applications menu, with informational screens
provided by your CableCARD™ service (see illustrations below).
To view the CableCARD™ menu:
1. Press MENU and open the Applications menu.
2. Highlight CableCARD™ and press ►.
Press AT to select one of the side menu items and press
ENTER to display the information.
3.
I TV Guide On Screen
I Digital CC/Audio Selector || | CableCARD(tm) Pairing ||
® CableCARD(tm) Status
I Network Setup
Navigate Select HIM Back Exit
Note: The CableCARD™ menu is for informational purposes
only and has no user-adjustable options.
Viewing the digital signal meter
You can view the digital signal meter for ANT 1 and ANT 2
digital TV input sources only.
To view the digital signal meter:
E Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown in
step 3 below.)
;:5 Sleep Timer
i On/Off Timer
I PC Settings
HDM) Audio Auto
Gray Level 2
t#} Navigate Select Back ISTTi Exit
3. open the Terrestrial menu, highlight Signal Meter, and
press ENTER.
Input Configuration
i® Channel program
Channel Add/Delete ii
C#l Navigate I#! Select lUliiHl Back Ì3!ffi Exit
4. Use AT^ ► to select the antenna input and digital channel
whose signal you want to check.
Note: The physical digital channel number listed in the Signal
Meter screen may not correspond to a virtual TV channel
number Contact your local broadcasters to obtain the RF
channel numbers for your local digital stations.
........I.. .
ij Antenna
S Physical Digital Channel |
i Virtual Digital Channel
To close the screen and return to the Terrestrial menu:
Highlight OK and press ENTER.
To return to normal viewing:
Press EXIT.
44 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.