Viewing the system status, To check the system status, Restore factory defaults – Toshiba 32HLX95 User Manual
Page 45: To cancel the reset
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 6: Setting up your TV
Viewing the system status
To check the system status:
1. Press MENU and open the Setup menu.
2. Highlight Installation and press ENTER. (A new set of
Installation menu icons will appear on-screen, as shown
below right).
I Sleep Timer
I On/Oif Timer
ii; PC Seilirigs
I HDMI Audio
I
Gray Level
(#} Navigate • Select gliiTl
Open the System Status menu, highlight System
Information, and then press ENTER.
Use^^ to scroll through the menu bar to check the
Product Information and Software Version.
System Information
Brand: Toshiba
Model: 32HLX95
0.8.2
Jun 13 2005 - 13:54:14
FW:1.41
Sub:41
To close the screen and return to the Installation menu:
Highlight Done and press ENTER.
To return to normal viewing:
Press EXIT.
Restore Factory Defaults
To restore all settings and channels to their factory default
values:
1. Follow steps 1-3 above.
2. Use^^ to scroll through the menu bar to select Factory
Defaults.
System Information
I This window provides the ability to reset the TV
I settings.
I Type in your PIN now (or "0000" if no PIN has
I been set) to restore settings to their factory
I default values.
3. Enter your PIN code (or 0000 if no PIN code has been set).
4. Highlight Yes and press ENTER. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the restore process.
To cancel the reset:
Highlight No and press ENTER.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
45