Toshiba 32HLX95 - Manual (Page 30)

Chapters: Using the mmole control
Programming the remote control to operate your other devices (continued)
Using the volume lock feature (8000)
For the TV, CABLE/SAT, VCR, and DVD modes, the volume
controls (VOL AW and MUTE) can be locked to the selected
device mode. This feature does not apply to the AUDIO 1 and
AUDI02 modes.
To lock the volume controls to always control the
CABLE/SAT device volume (for example);
1. Repeatedly press MODE to select CABLE/SAT mode.
2. While holding down RECALL, ptess 8 - 0 - 0 - 0.
3. Press VOL A.
The CABLE/SAT mode light will blink two times (locked).
To reset the volume controls to the original device mode:
1. While holding down RECALL, press 8 - 0 - 0 - 0.
2. Press VOLT.
The mode light will blink four times (unlocked).
Operational feature reset (8900)
This feature clears all setup features not related to “Device code
set up” and resets the Volume Lock to “TV.”
To reset the features:
While holding down RECALL, press 8 - 9 - 0 - 0. The
Mode indicator will blink two times, and then pause and
blink two more times.
H
0 0 (5)
© © ®_
Sm @ © ©
J if
O’’-
■■■. <( ■ Ì ..1 ■
_) J_| ■___T ' I
S!C«an___________ oKfr
3D -iJ ■ '.2LJ .
f HIÌW PAIISR<ST£P PLAŸ . 1=1=
Numbers
MODE
VOLAT
RECALL
30 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.