Selecting the cinema mode (480i signals only, To set the cinema mode to film, To set the cinema mode to video – Toshiba 32HLX95 User Manual
Page 68: Using the freeze feature, Selecting the cinema mode (480i signals only)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 8: Using the TV’s features
Selecting the cinema mode
(480i signals only]
When you view a DVD (480i signal; 3:2 pulldown processed)
from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream EID I/HD 2 (component video), or HDMI inputs
on the TV, smoother motion can be obtained by setting the
Cinema Mode to Film.
To set the Cinema Mode to Film:
1. Press MENU and open the Video menu.
2. Highlight Theater Settings and press ENTER.
..J&Ji
is; Picture Settings
!i Advanced Picture Settings »
(^1 Mavigate Select B!l!ii!l Back IHil Exit
3. In the Cinema Mode field, select Film.
Theater Settings
Picture Size
Picture Scroll
Cinema Mode
Auto Aspect Ratio
Natural
-1
4. To save the new settings, highlight Done and press
ENTER. To revert back to the factory defaults, highlight
Reset and press ENTER.
To set the Cinema Mode to Video:
Select Video in step 3 above.
Using the FREEZE feature
1. When viewing the TV, press FREEZE to make the picture a
still picture.
2. To return to the moving picture, either press FREEZE
again, press EXIT or press any other button.
Note:
If the TV is left in FREEZE mode, after 15 minutes it will
automatically release the EREEZE mode and return to the
moving picture.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws of
the United States and other countries, and may subject you to
civil and criminal liability.
■FREEZE
68
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.