Toshiba 32HLX95 - Manual (Page 74)

m^mmwéWMwm
Chapter 8: Using the TV's features
Adjusting the audio
Muting the sound
Press MUTE to partially reduce (1/2 Mute) or turn off (Mute)
the sound. Each time you press MUTE, the mute mode will
change in the following order.
1/2 Mute —> Mute ^ Volume ^
□
If the closed caption mode is set to Off when you select “Mute”
mode, the closed caption feature is automatically activated. To
mute the audio without automatically activating the closed
caption feature, use VOL
T to set the volume to 0. See “Using
the closed caption mode” on page 72 for more information on
closed caption modes.
® ® ®
d)® (9)
Q
.
_ EXIT I
jii(cHffn^||NwcRri:;
SLOVtfDiR_______ SKIP
i (3D0CE3 C^QC^ )
flgw PAUSE/STEP PLAY EE
i r^iiOiTiTi;:^ rvnnriii^
OPEN-CLOSE mm STOP sec ' ^
(^OCìn
•v/T"?
Using the digital audio selector
You can use the Digital CC/Audio selector to conveniently
switch between audio tracks on a digital channel (for those
channels that have multiple audio tracks). This temporarily
overrides the audio track chosen by the language option under
Audio Setup.
1. Press MENU and open
the Applications menu.
2. Highlight Digital CC/
Audio Selector and press
ENTER.
3. Press AT to select
Audio.
4. Press ^ or ► to select
the desired service, and
then press ENTER.
1^) Navigate Seiect HHin!! Back I3!iil Exit
Audio
Closed Captfon
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound from your TVs speakers. MTS
also can transmit a second audio program (SAP) containing a
second language, music, or other audio information (when
provided by individual stations).
The MTS feature is not available when the TV is in VIDEO
mode. When the TV receives a stereo or SAP broadcast, the
word “STEREO” or “SAP” appears on-screen when RECALL is
pressed.
To listen to stereo sound:
1. Press MENU and
open the Audio menu.
2. Highlight Audio Setup
and press ENTER.
3. Press T to highlight
the MTS field, and then press ^ ► to select Stereo.
VA ^
m Audio Settings
I Advanced Audio Settings!
MTS
Language
Speakers
Optical Output Format
DVD Audio
Reset
English
Dolby Digital.'Surround
Stereo
Done
4. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Note:
• You can leave the TV in Stereo mode because it automatically
outputs the type of sound being broadcast [stereo or monaural).
• if the stereo sound is noisy select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station
(if available):
Highlight the Language field in step 3 above, and then press M
► to select the language you prefer.
To listen to a second audio program on an analog station (if
available):
Select SAP in step 3 above.
Note:
• /4 second audio program [SAP] can be heard only on those TV
stations that offer it For example, a station might broadcast another
language as a second audio program. If you have SAP on, you will
see the current program on the screen but hear the other language
instead of the program’s normal audio.
• if you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal audio
will be output However, occasionally there is no sound at all in SAP
mode. If this happens, set the MTS feature to Stereo mode.
74
Copyright © 2005 TOSHIBA CORPORATION. Ail rights reserved.