Using the channelbrowser™ (continued), Adding channels to the channel history, To set a channel as home using the menu setup – Toshiba 32HLX95 User Manual

Page 63: To tune to the home channel, Using the channelbrowser, Tuning channels, C°ib cao'co)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Chapter 8: ikiagtimf^s features

Tuning channels

(continued)

Using the ChannelBrowser™

(continued)

Adding Channels to the Channel History:

The Channel Browser will keep a history of the last 32 channels
tuned. A separate history will be stored per input (ANTI,

ANT2, and Cable Box). If you change inputs, you will begin a

channel history for that input. If you return to an input that
already has channels stored in its history, you will return to the
same channel history that was there.

It will store all channels that are tuned to using the number
buttons on the remote control. It will store channels that were
tuned to for at least 7 seconds from CH AW or FAV CH

AT

on the remote control.

Clearing Channels from the Channel History:

Turn the TV on and off will clear the channel history:

Changing the antenna inputs (ANTI, ANT2, and Cable Box)
or removing the CableCARD™ will clear the history.

To set a channel as HOME using the remote button:

1. Tune to the channel you would like to be your home

channel.

2. Press and hold HOME 1%^ for 3 seconds to save a channel

as the HOME channel. The channel browser banner will
display at the bottom of your screen when the channel is
saved with the home icon flashing green.

Note: You can set a different honne channel for ANTI, ANT2,

and Cable Box.

To set a channel as HOME using the menu setup:

1. Press MENU and open the Preferences menu.

2. Highlight Home CH Setup and press ENTER. The Home

CH Setup window will display.

Home GH Setup

ANT 2

Cable Box

Done

Note: 'Cable Box” will be active only if you connected a cable

box to your TV.

3. Use

AT

to select the input type you want to set the home

channel for.

4. Use the Channel Number buttons on the remote control to

enter the desired channel for each input.

5. To save your selections, highlight Done and press ENTER

to save your entries.

To clear the entries, highlight Reset and press ENTER.

To tune to the HOME channel:

For each input that you have set a home channel for, press

HOME 1%^ on your remote to tune to the home channel.

Note:

If you are on an input other than an antenna or cable box input and press

ffOME

iih key your TV will tune to the last visited home channel.

© ( D ®
® ®

® ® ®

(i^ Q

O

^ EXIT

J

woRir ______

(CH RTN) (

t

V/VCH) (

r

ECAT) fMUTD

SLOW/DIR___________SKiP

R£W PAUSe/STEP FlAY fF

oPEN?aos£ mim

stop

~~~~

(^( c°ib cao'co)

ANGi£ SUBTITLE AUDfO

© (§) @ ®

PAVCH A-B REPEAT SEARCH FREEZE

© O O O

TOSHIBA

HOMElf

DrtU^

BACK (@)

NEXT

■NEXT(@]

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

63

Advertising
This manual is related to the following products: