Toshiba 32HLX95 - Manual (Page 64)

Chapter 8: Using the TV’s features
Tuning channels (continued)
To tune to the channels you programmed as Favorite Channels,
see page 42.
Tuning to the next programmed channel
To tune to the next programmed channel:
Press CH AT on the remote control or TV top panel.
Note:
• This feature will not work unless you program channels into the
TV’s channel memory [see page 40].
• If you are recording a digital channel, you will only be able to
change channels between analog channels while the recording is
in progress. This is because the digital tuner in the TV will be
locked on the channel that is currently recording. If you are
recording an analog channel, you will only be able to change
channels between digital channels while the recording is in
progress. This is because the analog tuner in the TV wili be
locked on the channel that is currently recording.
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number buttons (0-9) on the remote
control. For example, to select channel 125, press 1, 2, 5.
Tuning digital channels:
Press the Channel Number buttons (0-9) on the remote
control, followed by the - (dash) button and then the sub­
channel number. For example, to select digital channel 125-1,
press 1, 2, 5, T
Note: If a digital channel is not programmed-either through
the automatic channel scan [page 40] or the channel add/
delete function [page 4 l]-you will have to tune the RF
channel using the Channel Number and Dash buttons on the
remote control
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1. Select the first channel you want to view.
2. Select a second channel using the Channel Number buttons
(and the dash (-) button if selecting a digital channel).
3. Press CFl RTN on the remote control. The previous
channel will display. Each time you press CFI RTN, the TV
will switch back and forth between the last two channels
that were selected.
Note: If you press CH RTN from a non-antenna Input, the TV
will return to the last-viewed ANT input and channel
If you are currently recording a program, this feature wili not
be available.
Switching between two channels using
SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel
in CFi RTN, so you can return to that channel quickly from any
other channel by pressing CFi RTN. To memorize a channel in
CH RTN:
1. Select the channel you want to program into CH RTN.
2. Press and hold CH RTN for about 2 seconds until the
message “Channel Memorized” appears on the screen. The
channel has been programmed into CH RTN.
3. Continue to change channels until your desired channel is
selected.
4. Press CH RTN. The memorized channel will be selected.
The TV will return to the memorized channel one time
only. Once you press CH RTN and then change channels
again, CH RTN memory will be cleared and the button
will function as Channel Return, by switching back and
forth between the last two channels that were selected.
■ Channel Numbers
- [dash]
CH AT
CH RTN
64 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.