HP LaserJet 4610n - Manual (Page 237)

Glossary
bidirectional communication
Two-way data transmission.
bin
A receptacle for holding printed pages.
BOOTP
Abbreviation for "Bootstrap Protocol," an Internet protocol that allows a
computer to find its own IP address.
chooser
A Macintosh accessory that allows you to select a device.
CMYK
An acronym for colors "cyan, magenta, yellow, and black."
control panel
The area on the printer that contains buttons and a display screen. Use the
control panel to set printer settings and to get information about the printer’s
status.
DDR
Acronym for double data-rate.
default
The normal or standard setting for hardware or software.
DHCP
An acronym for "dynamic host configuration protocol." DHCP enables
individual computers or peripherals connected to a network to find their own
configuration information, including the IP address.
DIMM
An acronym for "dual in-line memory module." A small circuit board that
holds memory chips.
Emulated PostScript
Software that emulates Adobe PostScript, a programming language that
describes the appearance of the printed page.
firmware
Programming instructions that are stored in a read-only memory unit inside
the printer.
Flash memory card
A small-sized, high-quality, removable memory card.
font
A complete set of letters, numerals, and symbols in a typeface.
ENWW Glossary 225