HP LaserJet 4610n - Manual (Page 177)

2. Firmly lift the two green handles on either side of the fuser to disengage the fuser rollers.
3. Grasp the media by both corners and pull to remove it.
NOTE If the media tears, make sure that all media fragments are removed from the paper path
before resuming printing. Do not reach into the fuser until it has cooled.
4. Grasp the green handles on the transfer unit and pull down. The front cover will open as
the transfer unit is pulled down.
CAUTION Do not place anything on the transfer unit while it is open. If the transfer unit is punctured,
print quality problems may result.
5. Grasp the media by both corners and pull down. If the media appears to be crumpled in
the fuser, go to step 6.
ENWW Clearing jams 165