HP LaserJet 4610n - Manual (Page 53)

Menu item Values Description
JOB HELD TIMEOUT OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK
Sets the period of time that the
system keeps files in job storage
before deleting them from the queue.
The default is OFF.
SHOW ADDRESS AUTO
OFF
This item determines whether the
printer’s IP address is shown on the
display with the Ready message. The
default is OFF.
COLOR/BLACK MIX AUTO
MOSTLY COLOR
PAGES
MOSTLY BLACK
PAGES
This menu item establishes how the
printer switches from color to
monochrome (black and white) mode
for maximum performance and print
cartridge life.
AUTO will determine the mode the
engine will go into based on the first
page of a print job. If the first page is
monochrome, the engine will go into
mono mode until a color page is
detected. It will then continue in color
mode until the end of the job. If the
first page is in color, the engine will
go into color mode for the duration of
the job.
Select MOSTLY COLOR PAGES if
nearly all of your print jobs are color
with high page coverage. This will
cause the engine to always run in
color mode, even if the whole job is in
monochrome.
Select MOSTLY BLACK PAGES if
you print mostly monochrome print
jobs, or a combination of color and
monochrome print jobs. This will
cause the engine to switch back and
forth between color and monochrome
mode. If the first page is
monochrome, the engine will go into
mono mode until a color page is
detected. It will then go into color
mode. If 3 consecutive monochrome
pages are detected, the engine will
switch back to monochrome mode
again. If the first page is color, the
engine will go into color mode until 3
consecutive monochrome pages are
detected, at which point it will switch
back to monochrome mode again
ENWW Configure device menu 41