HP LaserJet 4610n - Manual (Page 131)

8. Align the print cartridge with the tracks inside the printer and insert the cartridge until it is
completely seated.
NOTE If a cartridge is in the wrong slot, the control panel will display the message INCORRECT
<COLOR> CARTRIDGE.
9. Close the front cover and then close the top cover. After a short while, the control panel
should display Ready.
10. Installation is complete. Place the used print cartridge in the box in which the new
cartridge arrived. See the enclosed recycling guide for recycling instructions.
11. If you are using a non-HP print cartridge, check the control panel for further instructions.
For additional help, go to http://www.hp.com/support/clj4610 .
ENWW Changing print cartridges 119