HP LaserJet 4610n - Manual (Page 159)

Control panel message Description Recommended action
Printing...
FONT LIST
The printer is generating either the PCL
or PS personality typeface list. The
printer will return to the Ready state
when the page is completed. No action necessary.
Printing...
MENU MAP
The printer is generating the printer
menu map. The printer will return to the
Ready state when the page is completed. No action necessary.
Printing...
PQ TROUBLESHOOTING
The printer is generating the print quality
troubleshooting pages. The printer will
return to the Ready state when the
pages are printed. Follow the instructions on the printed
pages.
Printing...
REGISTRATION PAGE
The printer is generating the registration
page. The printer will return to the SET
REGISTRATION menu when the page
is completed. Follow the instructions on the printed
pages.
Printing...
RGB Samples
This message displays while the printer
RGB samples page is being generated. No action necessary.
Printing...
SUPPLIES STATUS
The printer is generating the supplies
status page. The printer will return to the
online Ready state when the page is
completed. No action necessary.
Printing...
Usage Page
The printer is generating the usage
page. The printer will return to the online
Ready state when the page is completed. No action necessary.
Processing... The printer is currently processing a job
but is not yet picking pages. When paper
motion begins, this message will be
replaced by a message that indicates
which tray the job is being printed from. No action necessary.
Processing...
copy <X> of <Y>
The printer is currently processing or
printing collated copies. The message
indicates that copy X of Y total copies is
currently being processed. No action necessary.
Processing...
from tray xx
The printer is actively processing a job
from the designated tray. No action necessary.
Ready
The supplies gauge will display the
consumption levels of print
cartridges.
The printer is online and ready for data.
No status or device attendance
messages are pending at the display. No action necessary.
Ready
Diagnostics mode
To exit press STOP KEY
The printer is in a special diagnostics
mode. Press the S
TOP
key to exit the special
diagnostics mode.
OR
No action is necessary.
Receiving
upgrade
A firmware upgrade is in progress. Do not turn the printer off until the printer
returns to Ready.
Control panel messages (continued)
ENWW Control panel messages 147