HP LaserJet 4610n User Manual
Page 158
Control panel message
Description
Recommended action
ORDER TRANSFER KIT
LESS THAN XXX PAGES
For help press
alternates with
Ready
The transfer unit is near end of life.
Printing can continue until transfer unit
life ends.
1.
Press to view help for the
message.
2.
Obtain the transfer kit part number
from help.
3.
Order the transfer kit.
Output Bin Full
Remove all paper
from bin
The output bin is full and must be
emptied for printing to continue.
Remove media from the output bin.
Paused
To return to Ready
press RESUME key
The printer is paused, and there are no
error messages pending at the display.
The I/O continues receiving data until
memory is full.
Press the
S
TOP
key.
Performing
PRINT/STOP TEST
The printer is performing a Print/Stop
Test.
No action necessary.
Performing
upgrade
A firmware upgrade is in process.
Do not turn the printer off until the printer
returns to Ready.
Performing...
PAPER PATH TEST
The printer is performing a Paper Path
Test.
No action necessary.
Please wait
The printer is in the process of clearing
data.
No action necessary.
Powersave on
The printer is in the power save mode.
Any button press, an error condition, or
the receipt of printable data may clear
this message.
No action necessary.
PRINTING STOPPED
To continue press
This message is displayed when a Print/
Stop Test is run and time expires.
Press to continue printing.
Printing...
CMYK Samples
This message displays while the printer
CMYK samples page is being generated.
No action necessary.
Printing...
CONFIGURATION
The printer is generating the
configuration page. The printer will
return to the online Ready state when
the page is completed.
No action necessary.
Printing...
DEMO PAGE
The printer is generating the demo page.
The printer will return to the online
Ready state when the page is completed.
No action necessary.
Printing...
Event Log
The printer is generating the event log
page. The printer will return to the online
Ready state when the page is completed.
No action necessary.
Printing...
FILE DIRECTORY
The printer is generating the mass
storage directory page. The printer will
return to the Ready state when the page
is completed.
No action necessary.
Control panel messages (continued)
146
Chapter 8 Problem solving
ENWW