HP LaserJet 4610n User Manual
Page 25
The printer comes with printing system software and printer drivers on a CD-ROM. The
printing system software on the CD-ROM must be installed to take full advantage of the
printer features.
If you do not have access to a CD-ROM drive, you can download the printing system
software from the Internet
.
NOTE
Sample model scripts for UNIX® (HP-UX®, Sun Solaris) and Linux networks are available
for download at
.
You can download the latest software free of charge at
.
Installing Windows printing system software for direct connections
This section explains how to install the printing system software for Microsoft Windows 2000
and Windows XP.
When installing the printing software in a direct-connect environment, always install the
software before connecting the parallel or USB cable. If the parallel or USB cable was
connected before the software installation, see
Installing the software after the parallel or
.
Either a parallel or USB cable can be used for the direct connection. However, you cannot
connect parallel and USB cables at the same time. Use an IEEE 1284-compatible cable or a
standard 2-meter USB cable.
To install the printing system software
1. Close all software programs that are open or running.
2. Insert the printer CD-ROM into the CD-ROM drive.
If the welcome screen does not open, start it by using the following procedure:
●
On the Start menu, click Run.
●
Type the following: X:\setup (where X is the letter of the CD-ROM drive).
●
Click OK.
3. When prompted, click Install Printer and follow the instructions on the computer screen.
4. Click Finish when the installation has completed.
5. You might need to restart the computer.
6. Print a Test Page or a page from any software program to make sure that the software is
correctly installed.
If installation fails, reinstall the software. If this fails, check the installation notes and readme
files on the printer CD-ROM or the flyer that came in the printer box, or go to
or more information.
Installing Windows printing system software for networks
The software on the printer CD-ROM supports network installation with a Microsoft network.
For network installation on other operating systems, go to
ENWW
Printer software
13