HP LaserJet 4610n - Manual (Page 54)

Menu item Values Description
TRAY BEHAVIOR USE
REQUESTED
TRAY
MANUALLY
FEED PROMPT
PS DEFER MEDIA
Allows you to specify settings for the
tray selection behavior. (This setting
allows you to configure the trays to
behave like trays in some previous
HP printers and to configure two-
sided printing behavior for pre-printed
paper.)
USE REQUESTED TRAY:
Determines whether the printer tries
to pull paper from a different tray than
the one that you selected in the
printer driver.
● EXCLUSIVELY: Sets the printer
to pull paper only from the tray
that you selected and not pull
from another tray automatically if
the tray that you selected is
empty.
● FIRST: Sets the printer to pull
from the tray that you selected
first, but allows the printer to pull
from another tray automatically if
the tray that you selected is
empty.
The default for USE REQUESTED
TRAY is EXCLUSIVELY.
MANUALLY FEED PROMPT:
Determines when the printer shows a
prompt regarding pulling from Tray 1
if your print job does not match the
type or size that is loaded in any
other tray.
● ALWAYS: Select this option if
you always want to be prompted
before the printer pulls from Tray
1.
● UNLESS LOADED: Prompts you
only if Tray 1 is empty.
The default for MANUALLY FEED
PROMPT is ALWAYS.
PS DEFER MEDIA affects how paper
is handled when printing from an
Adobe PS print driver. ENABLED
uses HP’s paper handling. Disabled
uses the Adobe PS paper handling.
The default is ENABLED.
See Changing printer control panel
configuration settings for more
information.
42 Chapter 2 Control panel ENWW