HP LaserJet 4610n - Manual (Page 205)

A
Working with memory and
print server cards
Printer memory
The printer has one 200-pin DDR SDRAM slot. The slot is available for increasing printer
memory. DDR SDRAM memory is available in 128, 256, or 512 MB modules.
NOTE Memory specification: The HP Color LaserJet 4610n printer uses 200-pin small outline dual
inline memory modules (SODIMM) that support 128, 256, or 512 MB of RAM.
The printer has a flash memory card slot reserved for printer firmware.
NOTE Use the flash memory card slot for firmware only. The slot is marked "Firmware Slot".
NOTE The flash memory card adheres to Compact Flash specifications and size.
CAUTION Do not insert a flash memory card that is designed for use with a digital camera into the
printer. The printer does not support photo printing directly from a flash memory card. If you
install a camera-type flash memory card, the control panel displays a message asking if you
want to reformat the flash memory card. If you choose to reformat the card, all data on the
card will be lost.
You may want to add more memory to the printer if you often print complex graphics or PS
documents, or use many downloaded fonts. Additional memory also allows the printer to
print multiple, collated copies at the maximum speed.
NOTE Single in-line memory modules (SIMMs) / dual in-line memory modules (DIMMs) used on
previous HP LaserJet printers are not compatible with the printer.
NOTE To order DDR SDRAM, see Supplies and accessories .
Before ordering memory, see how much is currently installed by printing a configuration page.
Printing a configuration page
1. Press M
ENU
to enter the MENUS.
2. Press to highlight INFORMATION.
3. Press to select INFORMATION.
4. Press to highlight PRINT CONFIGURATION.
5. Press to print the configuration page.
ENWW Printer memory 193