HP LaserJet 4610n - Manual (Page 153)

Control panel message Description Recommended action
If no paper in tray:
Manually Feed
<TYPE> <SIZE>
For help press
alternates with
Manually Feed
<TYPE> <SIZE>
To use another
tray press
A job was sent that specified MANUAL
FEED and Tray 1 is empty. Load Tray 1 with the specified media.
OR
To use media from another tray, press
and select the tray from the list.
INCORRECT <COLOR>
CARTRIDGE
alternates with
For help press
The supplies gauge will display the
consumption levels of print
cartridges.
A cartridge is installed in the wrong slot
and the cover is closed. 1. Open the top cover and image
transfer unit.
CAUTION
The image transfer unit can be easily
damaged.
2. Remove the incorrect print cartridge.
3. Install the correct print cartridge.
4. Close the front cover.
Incorrect PIN The wrong PIN was entered. After three
incorrect PIN entries, the printer will
return to Ready Re-enter PIN correctly.
INCORRECT SUPPLIES
For status press
The supplies gauge will display the
consumption levels of print
cartridges.
At least one supply item is incorrectly
positioned in the printer and another
supply item is missing, incorrectly
placed, out, or low. 1. Press to access the SUPPLIES
STATUS menu.
2. Press and to highlight the
specific supply that has a problem.
3. Press to view help for the supply.
4. Press and to step through the
instructions.
Initializing
permanent storage
Displayed when the printer is turned on
to show that permanent storage is being
initialized. No action necessary.
Initializing... This message is displayed when the
printer is turned on, as soon as the
individual tasks begin initialization. No action necessary.
INSERT OR CLOSE
TRAY X
For help press
Tray XX must be inserted or closed
before the current job can be printed. Close the tray indicated.
Control panel messages (continued)
ENWW Control panel messages 141