HP LaserJet 4610n - Manual (Page 87)

7. Press or to highlight the correct value.
8. Press to select the value. If the value entered is outside the valid range, Invalid value
will appear for two seconds. The display prompts you to enter another value.
After the X dimension is set properly, set the Y dimension as follows:
9. Press or to highlight the correct value.
10. Press to select the value. If the value entered is outside the valid range, Invalid value
will appear for two seconds. The display prompts you to enter another value. The printer
displays a message indicating the dimensions for the custom size.
Printing from Tray 1 (multipurpose tray)
Tray 1 is a multipurpose tray that holds up to 100 sheets of paper or 20 envelopes. It
provides a convenient way to print envelopes, transparencies, custom-size paper, heavy
media greater than 32 lb, or other types of media without having to unload the other trays.
NOTE Tray 1 does not have a CUSTOM/STANDARD switch, so all paper sizes for Tray 1 are
undetectable.
Loading Tray 1
CAUTION To avoid jams, never add or remove paper from Tray 1 during printing.
1. Open Tray 1.
2. Set the side guides to the desired width.
ENWW Configuring input trays 75