Ecler ECLERNET MANAGER - Manual (Page 136)

136
Possible targets are:
 INTERNAL: the event output is "internal", so it may be used as input or stimulus for another event
to concatenate them
 INPUT MUTE: to MUTE an input; you need to select this input and its behaviour mode:
o PUSH: "unlatch" mode; MUTE control follows the stimulus (for example, MUTE ON as
long as the switch is pressed)
o TOGGLE: "latch" mode; successive presses toggle the MUTE on/off
 OUTPUT MUTE: to MUTE an output; you need to select this output and its behaviour mode:
o PUSH: "unlatch" mode; MUTE control follows the stimulus (for example, MUTE ON as
long as the switch is pressed)
o TOGGLE: "latch" mode; successive presses toggle the MUTE on/off