Ecler ECLERNET MANAGER - Manual (Page 98)

98
 Activate Remote Finder: activates/deactivates the blinking of the front panel light indicators (LCD
display for WPTOUCH, LEDs for MPAGE16 series) on the concerned digital hardware remote
control panel, thus allowing easy identification on site. Simultaneously, the frame of the device
shown in the REMOTES LIST also blinks, making it possible to link a virtual device of the Project
with its hardware counterpart, to check its identity before changing its settings.
Flashing yellow frame after the Remote Finder activation
 Firmware Upgrade: opens a dialog box that allows you to load a remote device firmware file (with
.bin extension) and to transfer it to the related device. The device must be "online" to perform this
operation.
Here is the procedure for setting different types of remote control that can be connected to a MIMO88
7.10.1. Configuring a WPTOUCH-type remote control
The WPtouch is a digital remote control panel for wall mounting featuring the following elements:
 LCD display
 touch-sensitive jog wheel
 2 touch-sensitive keys (hereafter T1: left key, T2: right key)
The LCD screen, the T1 key and the wheel are programmable from EclerNet
Manager for the WPtouch to perform certain actions in order to control and
display information. The T2 always switches between volume and selection.