Ecler ECLERNET MANAGER - Manual (Page 151)

151
Of course, the linking groups, the matrix management using presets, etc. that are available in the
standard version are still available in the CONF version (see chapter 7 for more information about these
functions).
Outputs 5 to 8 and 13 to 16 (in the case of a master/slave configuration) can be fed with the signal of
one of the available mixes (outputs 1 to 4 and 9 to 12), but with independent level control and DELAY:
8.5. OUTPUTS Section
The aspect of the OUTPUTS section of the MIMO88CONF for outputs 1 to 4 and 9 to 12 is as follows:
The image shows that the MIMO88CONF outputs only have two differences compared to the standard
version (see chapter 7 for more information about these features):
 No crossover filters
 4-Band parametric EQ (8 in the standard version)