Ecler ECLERNET MANAGER - Manual (Page 147)

147
3. Once the device is added to the project and "online" or connected (right mouse button ->
Connect -> Green fixed icon to its right), access the dialogue box that allows you to load the
firmware file from a device (with .bin extension) and transfer it to the device in question.

4. A progress bar appears on the screen during the device firmware update.
5. And then a message of completion of the process.
6. After this, the device automatically performs a full boot cycle (a "reset" or restart), appearing
in the EclerNet Manager application under its new identity, MIMO88CONF.