Ecler ECLERNET MANAGER - Manual (Page 15)

15
 Device: device detailed display window, appearing only when Detail mode is enabled.
Shows all general controls for the device and/or one or more device channels (input selection,
output configuration, network settings, DSP, monitoring, etc.)
Device window for NPA series device
There are several ways to turn on/off the Detail mode:
o Clicking on the Detail ( ) icon in the upper right corner
o From the “View -> Enter/Exit Detail Mode” menu entry
o Double clicking on a device or channel in any of the Project windows
o Pressing
Return or Esc after a channel or device selection in any of the Project windows
When the Detail mode is activated, the following icons appear in the lower right corner of the
screen:
o Show / Hide Channel 1: shows/hides channel 1 controls for the selected device
o Show / Hide Channel 2: shows/hides channel 2 controls for the selected device
...
o Show / Hide Channel n: ditto the above for channel n, in NZA devices with 4 or 6
channels
o Show / Hide Graph: shows/hides a window graphically displaying the frequency-
response curves resulting from crossovers and equalization applied to the corresponding
channel by DSP processing (see section: 5.2. Detailed view).