Ecler ECLERNET MANAGER - Manual (Page 54)

54
Unit’s firmware version
Internal signal generator offering pink noise, white noise, sine wave
and polarity check, with frequency adjustable between 10 and
20,000 Hz
Device configuration. See (1)
Network parameters configuration. See (2)
(1) Device configuration.
Clicking on the configuration edit icon opens the parameter setting
window:
For NZA series amplifiers, adjustable parameters are:
 Anticlip Mode: SOFT/MID/HARD.
The protection system against saturation can operate in Soft, Mid or Hard mode.
 Auto-Standby Mode: ON/OFF. Enables/disables the automatic sleep mode (low-consumption)
when no input signal is detected in any channel of the amplifier.
The next window shows the status of the adjustments made, as well as the number of
accumulated operating hours of the device (OPERATING TIME):