Ecler ECLERNET MANAGER - Manual (Page 160)

160
The GPI inputs can be programmed to control certain functions of the NXA device from external
hardware devices:
 recall one of the 5 available Presets (through a WPmVOL-SR or WPTOUCH wall panel)
 select a sound source in a preset list of the unit audio inputs for one channel or multiple channels
simultaneously (through a WPmVOL-SR or WPTOUCH wall panel)
 adjust the audio volume of one or more inputs, or one or more outputs (through a WPmVOL,
WPmVOL-SR or WPTOUCH wall panel)
Other remarkable features of the NXA series are :
 TP-NET external remote control protocol, via Ethernet and RS-232 (compatible with Crestron®,
AMX®, RTI®, VITY®, etc..)
 POWER ON/OFF button and/or front panel volume controls deactivated by software, preventing
unauthorized tampering
 Front panel volume controls can be assigned to one or more audio inputs or one or more
amplified outputs
 Self-diagnostics function for the correct operation of the amplifier, with FAULT relay: allows the
device failure detector to switch to an external redundant system, replacing the faulty unit with a
spare one
 Integrated "Anti-clip" system
For more information about MIMO88's hardware, refer to the product manual.