FingerTec R2 Manual - Manual (Page 18)

18
Center point
CONTENTS
Some precautions have to be taken to get a good read every time.
·
Make sure the center point of your finger is placed in the middle of the scanner for a good
read.
·
Recommended to use index finger. The terminal accepts other fingers but index is the
most convenient.
·
Make sure the finger is not wet, too dry, injured or dirty
·
Do not press hard on the sensor, just place it comfortably
·
Avoid direct sunlight or bright light
PASSWORD VERIFICATION
Password is an option for those who prefer not to use other verification methods. To verify via
password, insert User ID > OK > insert password and press OK.
CARD VERIFICATION
Place the card on the card scanning area and the terminal will read and verify the card.
Types of Verifi cation Methods
The fingerprint terminals offer various verification methods which include fingerprint (FP),
User ID (PIN), Password (PW), and RFID (RF). You can configure the terminal to offer multiv-
erification methods. Press Menu > Options > Access Options > Group VerType > Select the
Group > OK > Select the time > OK > Down arrow and select Verification Type > OK
The terminals support the following combinations of verification:
VERIFICATION TYPE DESCRIPTION
FP Fingerprint only
PIN User ID only
PW Password only
RF RFID Card only
FP/PW Fingerprint or password
FP/RF Fingerprint or RFID Card
PW/RF Password or RFID Card
PIN & FP User ID and fingerprint
FP & PW Fingerprint and password
NOTE
This feature is NOT available in
AC900 & M2