Chapter 2 • basics, Introduction to products, Overview – FingerTec R2 Manual User Manual
Page 5: Power on/off button, Keypad, Battery, Date/time, Voice, Control, Security
WelcomeCheck-In
01-01 09:00
Fri
AC900 MODEL
L.E.D Display
LCD Screen
Keypad
Fingerprint
Sensor
2 •
BASICS
Introduction to Products
FingerTec is a renowned brand name when if comes to commercial fingerprint products
for door access and time attendance systems. FingerTec offers a wide range of products
to cater to the growing need of biometric products in office/home automation as well as
in security industry.
Fingerprint terminals are loaded with powerful microprocessors that can process bio-
metrics authentication methods for accurate personal identification and for collection of
precise data for time attendance and door access. In addition, some fingerprint terminals
are designed to accept card verification as an added security measure.
This manual covers three models of fingerTec’s fingerprint products, AC900, R2 and M2.
Overview
ITEM
FUNCTION
LCD Screen
Displaying status of terminal, day, date and time.
LED Display
Green LED – The terminal is working fine and it is in standby mode.
Red LED – There is an error at the terminal that requires checking. For
first time use, the terminals need to be charged fully to avoid having
the red light blinking.
Keypad
To input instructions into the terminal and to allow configuration.
Fingerprint Sensor
To scan finger for confirmation of identity.