FingerTec TA200 Plus Manual - Manual (Page 10)

11 CONTENTS
AdjUSt VolUme
The default volume of the terminal’s voice is 67. The volume can go as high as 100 and
as low as 0. To sustain the performance of speaker, it’s recommended to stay within the
range of 60-70. To adjust the volume Press Menu > System Icon > System > Vol > input
value > OK to save
Security Features
Security features help protect the information in the terminal from being accessed by
unauthorized individuals.
AdmIN AFFIrm
Register an administrator to the system by enrolling a fingerprint or a password to a
user ID. Press Menu > User Mgmt > New User > Privilege: Admin > Choose enrollment
method > OK to Save. After enrolling an administrator, the main menu can only be ac-
cessed by the administrator. The terminal will display “Admin Affirm” when an anau-
thorized individual tries to access the Menu.
Com Key
Create password for a specific terminal here. Press Menu > Comm. Icon > Security >
Insert Terminal ID No and Password > Ok to save. The security password known as COM
Key is intended for extra security. To connect the terminal with the software, the COM
key inserted in the Software must be the same as the one inserted in the terminal or else
the connection will not be established even though the activation key and product key
are correctly inserted.
Cleaning Terminal
CleANINg the Body
Use a dry cloth to clean the terminal’s body. Do not use any liquids, household cleaners,
aerosol spray, solvents, alcohol, ammonia and abrasive solutions to clean the body of
the terminal because it could damage it.
CleANINg the FINgerPrINt PrISm
Clean the fingerprint prism with a cellophane tape for (silicon coated prism). View the
video on how to clean the fingerprint prism at this link fingertec.com/newsletter/en-
duser/cleanfinger.html . For the non-coated prism, please use microfiber cloth.
Restarting and Resetting Terminal
If a feature isn’t functioning as it should, try restarting or resetting the terminals
reStArtINg the termINAl
Push the On/Off button on the terminal to restart the terminal. If you can’t restart the
terminal, or if the problem persists, you might want to reset.
reSettINg the termINAl
Go to Menu, press the System icon and click on Reset. Choose to Reset All Default Set-
tings, Reset Keyboard Settings or Reset Other Parameters. Resetting the terminal will
cause all your settings to return to the original factory settings.