Security, Tcms v2 online activation, Usb port – FingerTec TA200 Plus Manual User Manual
Page 17: Tcp/ip port, Power supply port
1
8
TOP
FRONT
1
8
CoNNeCtor PIN
CABle Color
CoNNeCtor
TX+
1
•
White/Orange
•
1
TX+
TX-
2
•
Orange
•
2
TX-
RX+
•
White/Green
•
RX+
4
•
Blue
•
4
5
•
White/Blue
•
5
RX-
6
•
Green
•
6
RX-
7
•
White/Brown
•
7
8
•
Brown
•
8
joINt 1 PIN
joINt 2 PIN
TX+ 1
•
•
RX+
TX- 2
•
•
6 RX-
RX+
•
•
1 TX+
RX- 6
•
•
2 TX-
USB Port
Linking with USB flash disk for remote data transfer.
tCP/IP Port
Connect with CAT 5 cable for LAN connection, one end to this port
and another end to the computer’s TCP/IP Port.
TCP/IP for Single Connection
–
Linking the termi-
nal to a single computer using TCP/IP requires Ethernet
10/100Base-T Crossover Cable. The cable can be used to
cascade hubs or to connect Ethernet stations back-to-
back without a hub. It works with both 10Base-T and
100Base-TX.
TCP/IP for Network Connection
–
Linking the terminals to multiple computers using TCP/IP re-
quires Ethernet 10/100Base-T Straight Thru Cable or “whips”. The cable works with both 10Base-T and
100Base-TX, connecting a network interface card to a hub or network outlet.
Power SUPPly Port
Insert the Power Adapter point to this port for power.
Security
Create password for a specific terminal here. Press Menu > Comm. > Security > Insert
Terminal ID No and Password > Ok to save. The security password known as COM Key
is intended for extra security. To connect the terminal with the software, the COM key
inserted in the Software must be the same as the one inserted in the terminal or else
connection cannot be established even though the activation key and product key are
correctly inserted.
TCMS V2 Online Activation
TCMS V2 is a genuine software by FingerTec. Every FingerTec access control model
comes bundled with a unique license key. To start using the terminal with TCMS V2, you
must connect the terminal to TCMS V2 and perform online activation. TCMS V2 reads
the serial number of your terminal and sends it for verification at the FingerTec server
via Internet. In case you do not have an Internet connection, you would need to do of-
fline activation. Please send the serial number and models of your terminals to your lo-
cal resellers or
to request for a product key and activation key.