FingerTec AC100 - Manual (Page 11)

12 CONTENTS
Cleaning Terminal
CleANiNg The Body
Use a dry cloth to clean the terminal’s body. Do not use any liquids, household cleaners,
aerosol spray, solvents, alcohol, ammonia and abrasive solutions to clean the body of
the terminal because it could damage it.
CleANiNg The FiNgerpriNT priSm
(This feature is NOT available in TimeLine 100 model.)
Clean the fingerprint prism with a cellophane tape for (silicon coated prism). View the
video on how to clean the fingerprint prism at this link fingertec.com/newsletter/en-
duser/cleanfinger.html . For the non-coated prism, please use microfiber cloth.
Restarting and Resetting Terminal
If a feature isn’t functioning as it should, try restarting or resetting the terminals
reSTArTiNg The TermiNAl
Push the On/Off button or “reset button” on the terminal to restart the terminal. If you
can’t restart the terminal, or if the problem persists, you might want to reset.
reSeTTiNg The TermiNAl
Press Menu > Option > System Option > Adv Opt > Rest terminal. Resetting of the ter-
minal will cause all your settings to return to it’s original factory settings. Make sure that
you have backed up all data before you proceed.