FingerTec AC100 - Manual (Page 29)

30 CONTENTS
Press Menu > User Manage > FPCard Mng > Enroll FPCard > Input a User ID (Make sure
that this User ID has been enrolled with a fingerprint > Show the Mifare Card at the
induction area > The LCD will display “Write Succ” to indicate that the process is suc-
cessful.
Now you can gain access or report attendance using the card or the fingerprint.
Registering FPCard
“Register FPCard” is a function available if you want to use your FP Card in other termi-
nals in the company. Press Menu > User Manage > FPCard Mng > Reg FPCard > Show
the Mifare Card at the induction area > The LCD will display “Write Succ” to indicate that
the process is successful. Now you can gain access or report attendance using the FP
card.
Unregistering FPCard
This is a function available if you do not want to use your FP Card in any terminals in the
company. Press Menu > User Manage > FPCard Mng > Unreg FPCard > Show the Mifare
Card at the induction area > The LCD will display “Write Succ” to indicate that the proc-
ess is successful
The card is still valid but the card cannot be used in that particular terminal to gain ac-
cess or report attendance.
Emptying FPCard
MiFare card is writeable; therefore you can use it time and time again. To delete all the
information in the card, use Empty FPCard function.
Press Menu > User Manage > FPCard Mng > Empty FPCard > Show the Mifare Card at the
induction area > The LCD will display “Write Succ” to indicate that the process is success-
ful. Now the card is empty and ready to accept enrollment.
Dumping FPCard
Fingerprint template stored in MiFare card can be transferred to the terminal by this
simple operation. Make sure that the card is containing fingerprint templates to proceed
with this operation.
Press Menu > User Manage > FPCard Mng > Dump FPCard > Show the Mifare Card at
the induction area > The LCD will display “Write Succ” to indicate that the process is suc-
cessful.Once copied, you can use fingerprint or the card on that particular terminal for
access or attendance.
Moving To FPCard
Fingerprint template stored in the terminal can also be transferred to the FP Card
through this simple operation. Once the process is done, the terminal deletes the finger-