FingerTec TimeLine 100 Manual - Manual (Page 12)

12 CONTENTS
4 • USER
Enrolling User
The terminals can enroll fingerprint templates, passwords and card information. This
chapter covers all possible user enrollments in the terminals.
Caution: Enrollment of supervisor or administrator is important to making sure of the
terminals data safety. Prior to enrolling new user, supervisor has to be enrolled first by
using any of methods mentioned below. Select Enroll Admin > Choose the Privilege
Level either Supervisor or Administrator to proceed.
CARD ENROLLMENT
The default card for the terminal with card reading feature is the RFID card. MiFare and
HID card systems are available upon request.
Enrolling card: Press Menu > User Manage > Enroll User > Reg RFID > New Enroll? >
OK > Key in User ID (PIN) > Wave the card at the scanning area until the screen displays
the Card ID > (OK) Save
PASSWORD ENROLLMENT
The terminals offer password verification and maximum length of password is 5 digit.
Enrolling password: Press Menu > User Manage > Enroll User > Enroll Pwd > New En-
roll? > OK > Key in User ID (PIN) > OK > Input your password > LCD showing the ID with
minus -P to indicate that the user ID is using password > OK (Save)
Changing password: Press Menu > User Manage > Enroll User > Enroll Pwd > ESC >
Input User ID > OK > Change your password > LCD showing the ID with minus -P to
indicate that the user ID is using password > OK (Save)
Verifying User
VOICE MESSAGE
VOICE / MESSAGE WHAT DOES IT MEAN?
“Verified” Identity verification is successful, the terminal stores the transaction
logs and opens the door (if connected to door access)
“Try again please” Identity verification is failed because card is not available in the ter-
minal or the password is incorrect.
“Admin Affirm” You are not an administrator of the system and you cannot access
Menu page
“Invalid ID” For 1:1 verification, User ID entered does not match with finger-
print.