FingerTec TimeLine 100 Manual - Manual (Page 8)

8
Back Plate
4 feet / 1.2 meter
(recommended)
CONTENTS
3 • INSTALLATIONS & COMMUNICATION
Installations
FingerTec terminals offer several connections for power and communications. Installa-
tions of FingerTec time attendance terminals are simple.
MOUNT ON WALL
•
After determining the height of the terminal from the ground level and have made
the relevant marks on the wall, drill the screws into the wall to secure the back
plate.
•
Attach the terminal to the back plate and tighten the screws. Refer to Appendix I for
dimensions and measurements of installation.
FLEXI-KIT
FingerTec offers flexi-kit for all its time attendance models. Attach the terminal on the
flexi-kit for convenience.