FingerTec TimeLine 100 Manual - Manual (Page 19)

19 CONTENTS
8 • RFID CARD FUNCTION
The fingerprint terminals are versatile and it can accept card verifications. This chap-
ter covers the Radio Frequency Identification or better known as RFID system. The
terminals accept RFID card with specifications of 64-bit, 125kHz.
Enrollment of RFID Card
RFID can be enrolled alone, with fingerprint or with password. Each RFID card comes
with a unique ID and the terminals will read from the numbers and match it with the
card.
Enrollment of RFID is easy. Press Menu > User Manage > Enroll User/Admin > Reg
RFID > OK > Do you want to do new enrollment? > OK > Insert the user ID > OK >
Wave the card to the induction area and the machine will display the card number on
the LCD along with the User ID > OK > The terminal will display User ID-C meaning
that the ID is enrolled with card > OK(Save)
Deleting RFID Card
RFID card can be used again and again but the information in the card must be de-
leted first before inserting new information.
Press Menu > User Manage > Delete > Input the User ID and wave the card at the
induction area > The LCD will ask whether you want to delete the User ID-C > The
terminal will ask whether you want to delete User ID > And to delete user. Press OK
to all.
Once the card has been emptied, it can be used again.
Changing Card ID
Press Menu > User Manage > Enroll User/Admin > Reg RFID > ESC > Change Card ID
> Key in Original ID > OK > Wave new card > OK (Save)